Five12.net -- Online Forum for the Numerology Music Sequencer

Five12.net -- Online Forum for the Numerology Music Sequencer (http://www.five12.net/index.php)
-   Vector Sequencer : News (http://www.five12.net/forumdisplay.php?f=38)
-   -   Vector firmware 1.0.7 (http://www.five12.net/showthread.php?t=3655)

jim 01-30-2019 09:30 PM

Vector firmware 1.0.7
 
Download:
http://files.five12.com/VS-1.0.7/VECTOR.BIN.zip

Instructions:

• Download and un-zip the Vector firmware file (VECTOR.BIN.zip).
• Press and hold the Shift button while powering up the Vector to enter USB Disk mode.
• Use a USB ‘A to B’ cable to connect the Vector to your computer. After a few seconds, the SD Card for the Vector will show up as a new disk.
• Unzip VECTOR.BIN.zip. On a Mac, the Finder may do that for you. Do not double-click on VECTOR.BIN, which the Finder will try to de-compress into something not useful.
• Make sure the filename is exactly VECTOR.BIN. The OS X Finder will often rename it (e.g. VECTOR-2.BIN), in that case be sure to rename it back to VECTOR.BIN. Copy VECTOR.BIN to the root directory of Vector’s SD Card – Delete or move any previous VECTOR.BIN firmware files.
• Now is also a good time to backup your Vector's PROJECT directory.
• Unmount/Eject the Vector’s SD Card from your computer, and power off your eurorack system.
• Hold down the Rec button on the Vector while powering up your system.
• Press Next to load the new Firmware, which takes about 20 seconds.
• Verify the Firmware is the correct version in Globals -- first page, 2nd OLED, top-right corner.


Release Notes:

1.0.7:

MIDI/DIN SYNC :
- fixed an issue w/ 'queue err' on start external sync source
- fixed an issue w/ tempo calculation on startup.

REC THRU:
- now works when the transport is not running.
- fixed an issue w/ stuck notes from the onboard keyboard (VKBD).
- works for MIDI outputs
- will now pass MIDI CC and Pitch Bend messages to MIDI outputs.

VEL & TIM VAR (Velocity and Timing variance) : now works!

Jack Expander : Fixed an internal error w/ fast tempos and Velocity DACs

1.0.6:

MIDI : fixed an issue with 'active sense' messages.
SCENES: Added scene numbers.
SCENES: Fixed a 'ui freakout' issue when changing presets in Scene mode.

nreeves 01-31-2019 12:39 PM

w00t! thanks Jim!

sounjaerk 01-31-2019 11:29 PM

midi thru via USB A?
 
anyone having any luck getting midi thru via the USB A port? with the latest firmware (1.07) i can get midi thru via the built-in keyboard, but still nothing from an external keyboard plugged into USB A. i'm trying to use the VS as a midi to cv converter.

jake

RitualAudio 02-01-2019 08:41 AM

I used a QuNexus keyboard via MIDI A and THRU, and it worked. Later in the evening something happened where the keyboard wasn't responding for a few minutes, then returned. I will be digging in this weekend to see whether that lapse was my keyboard, the cable, or the Vector.

sounjaerk 02-01-2019 10:36 PM

i have been trying (no luck) with an Akai MPK Mini, but set that aside today and plugged in a QuNeo and that works great, so something amiss with the Akai specifically, which works when connected to a laptop. Not sure what's up, but I'll try to investigate more.


All times are GMT -6. The time now is 06:48 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.