Numerology Store    Download  Video    Forum


Go Back   Five12.net -- Online Forum for the Numerology Music Sequencer > Third Party > Controllers

Reply
 
Thread Tools Display Modes
  #1  
Old 03-25-2016, 01:44 PM
Keltech317 Keltech317 is offline
Junior Member
 
Join Date: Mar 2016
Posts: 1
Default Launchpad Pro Setup/Configuration

UPDATE:Given a little time (and wine) I've made progress. It appears that in order for the LPP to receive the Setup SysEx/Data from N4.1 either:

a) The LPP has to be on and in programmer mode BEFORE launching N4.1

or

b) The LPP can be turned on and put into programmer mode after N4.1 is launched but it won't "sync" with the currently open Stack(s), they need to be (re)opened after the LPP has booted and synced.

Once done the operation follows the functions outlined on the "Cheat Sheet" included in the Label/Goodie folder from the Downloads page here at Five12.

If you have any feedback or corrections please reply.

Thanks,

K

OP:
Having a devil of a time getting the LPP and N4.1 (DEMO) productively communicating. I've done the controller setup (New Controller, Select LPP Standalone for both MIDI In/OUT, OMNI. Save). The only thing that appears to function is the Device button toggles to the Rack and either the User or Session button will toggle to the Mixer from the Rack. The online videos are referencing N2.3 and the original LP (e.g. User 2 button), and the Documentation hasn't caught up with N4.1 yet. Mac Mini under El Capitan. Right now i was looking to directly control N4.1 in standalone, Live is not running during these efforts. Any suggestions would be welcomed!

Last edited by Keltech317; 03-25-2016 at 07:28 PM. Reason: Updated with new info
Reply With Quote
  #2  
Old 04-04-2017, 08:59 AM
greenerpastures greenerpastures is offline
Junior Member
 
Join Date: Mar 2017
Posts: 2
Default

I'm also having this same issue - complete Numerology initiate as well, so a little frustrating! Anyone have any tips for how to get the Launchpad Pro working properly?
Reply With Quote
  #3  
Old 04-05-2017, 08:00 PM
jim jim is offline
Administrator
 
Join Date: Nov 2008
Location: Albuquerque, NM
Posts: 4,157
Default

Try this:

- Quit N4 if it's running.
- Plug in the LPad Pro
- Hold down the Setup button on the LPad, and then press the orange button. That's the one for programmer mode. The button will glow a bit brighter if it is in Programmer mode. After releasing the Setup button, you will see "Programmer" scroll across the grid -- but only if the previous mode was something else.
- Now check the MIDI Channel for the Lpad: Press Setup again. You'll see the bottom two rows are blue. That is where you set the MIDI Channel. The top-left button (of the two blue rows) is Channel 1, and should (by default) be a darker blue than the others. You can set whatever channel you like, but you will have to make sure your setup in Numerology matches it.

- Now start Numerology.
- Open the Controller Setup dialog. If you have not already, use the "gear" menu to add a setup for the Launchpad Pro.
- Setup the Input and Output MIDI Ports and the MIDI Channel. Use the "Launchpad Pro Standalone" MIDI Ports -- both for input and output.
- Save the config, and restart Numerology. If you open a project with any Note Sequencers, you should see the Launchpad light up. Use the "Note" button to bring up the "Rack Nav" screen, select a module, etc.

I've attached a screenshot of my config below. Let me know if this helps!

Cheers,
Jim
Attached Images
File Type: jpg Numerology4 ProScreenSnapz002.jpg (38.2 KB, 27 views)
Reply With Quote
  #4  
Old 04-06-2017, 01:52 PM
greenerpastures greenerpastures is offline
Junior Member
 
Join Date: Mar 2017
Posts: 2
Default

Thanks jim! I have to say I am extremely impressed with how prompt you are responding to everyone.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:20 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.